Show Interfaces Stack-Unit - Dell S6100 Configuration Manual

detail
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.1)
9.10(0.0)
9.9(0.0)
9.8(2.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.5.1.0
8.1.1.0
7.6.1.0
7.5.1.0
7.4.1.0
Example
Dell# show interfaces dampening
Interface Supp
Te 1/1/2/1
Te 1/1/10/1
Dell#
Related Commands
•
•

show interfaces stack-unit

Display information on all interfaces on a specific S-Series or Z-Series stack member.
Syntax show interfaces stack-unit unit-number
708 Interfaces
(OPTIONAL) Enter the keyword detail to display detailed interface dampening data.
Description
Introduced on the S6010-ON and S4048T-ON.
Introduced on the S6100–ON.
Added support to display the interface configurations corresponding to a range of ports.
Introduced on the S3100 series.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for 4-port 40G line cards on the E-Series.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced
Flaps Penalty Half-Life Reuse Suppress Max-Sup
State
Up 0
Up 0
dampening — configure dampening on an interface.
show interfaces configured
0 20
0 5
— display any interface with a non-default configuration.
800 4500 120
750 2500 20