Debug Frrp - Dell S6100 Configuration Manual

debug frrp

Clear the FRRP statistics counters.
Syntax debug frrp {event | packet | detail} [ring-id] [count number]
To disable debugging, use the no debug frrp {event | packet | detail} {ring-id}
[countnumber] command.
Parameters
event
packet
detail
ring-id
count number
Defaults Disabled.
Command Modes CONFIGURATION (conf-frrp)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0
Usage Information Because the resilient ring protocol can potentially transmit 20 packets per interface, restrict debug information.
612 Force10 Resilient Ring Protocol (FRRP)
Enter the keyword event to display debug information related to ring protocol transitions.
Enter the keyword packet to display brief debug information related to control packets.
Enter the keyword detail to display detailed debug information related to the entire ring
protocol packets.
(Optional) Enter the ring identification number. The range is from 1 to 255.
Enter the keyword count then the number of debug outputs. The range is from 1 to
65534.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.