Default-Metric - Dell S6100 Configuration Manual

Version
7.8.1.0
7.7.1.0
Usage Information
To remove all configured debug commands for BGP, enter the no debug ip bgp command.

default-metric

Allows you to change the metric of redistributed routes to locally originated routes. Use this command with the redistribute
command.
Syntax default-metric number
To return to the default setting, use the no default-metric command.
Parameters
number
Defaults 0
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
374 Border Gateway Protocol
Description
Introduced on the S-Series.
Introduced on the C-Series.
Enter a number as the metric to be assigned to routes from other protocols. The range is
from 1 to 4294967295.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.