Redistribute Isis - Dell S6100 Configuration Manual

Version
7.8.1.0
7.6.1.0
7.5.1.0
7.4.1.0
pre- 6.1.1.1

redistribute isis

Redistribute IS-IS routing information throughout the OSPF instance.
Syntax redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-value |
metric-type type-value] [route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 |
level-2] [metric metric-value | metric-type type-value] [route-map map-name]
[tag tag-value] command.
Parameters
tag
level-1
level-1-2
level-2
metric metric-value
metric-type type-
value
route-map map-
name
tag tag-value
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
1108 Open Shortest Path First (OSPFv2 and OSPFv3)
Description
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Added the keyword default.
Introduced on the E-Series.
(OPTIONAL) Enter the name of the IS-IS routing process.
(OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS Level-1 routes.
(OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-IS Level-1 and
Level-2 routes.
(OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS Level-2 routes.
(OPTIONAL) Enter the keyword metric then a number. The range is from 0 (zero) to
4294967295.
(OPTIONAL) Enter the keywords metric-type then one of the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
(OPTIONAL) Enter the keywords route-map then the name of the route map.
(OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into OSPF.
The range is from 0 to 4294967295.