Ip Helper-Address - Dell S6100 Configuration Manual

Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
Usage Information
You can only configure one domain name with the ip domain-name command. To configure more than one
domain name, configure the ip domain-list command up to six times.
To enable dynamic resolution of hosts, use the following steps:
•
•
To view current bindings, use the show hosts command.
Related Commands
•

ip helper-address

Specify the address of a DHCP server so that DHCP broadcast messages can be forwarded when the DHCP server is not on the same
subnet as the client.
Syntax ip helper-address ip-address
To remove a DHCP server address, use the no ip helper-address command.
Parameters
ip-address
Defaults Not configured.
Command Modes INTERFACE
764 IPv4 Routing
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
specify a domain name server with the ip name-server command
enable DNS with the ip domain-lookup command
ip domain-list — configure additional names.
Enter an IP address in dotted decimal format (A.B.C.D).