Redistribute Bgp - Dell S6100 Configuration Manual

Hide thumbs Also See for S6100:
Table of Contents

Advertisement

redistribute bgp

Redistribute routing information from a BGP process.
Syntax
redistribute bgp AS number [level-1| level-1-2 | level-2] [metric metric-value]
[metric-type {external| internal}] [route-map map-name]
To return to the default values, use the no redistribute bgp command with the appropriate parameters.
Parameters
AS number
level-1
level-1-2
level-2
metric metric-value
metric-type
{external| internal}
route-map map-
name
Defaults
IS-IS Level 2 routes only
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
884
Intermediate System to Intermediate System (IS-IS)
distribute-list out
— suppress networks from being advertised in updates. This command filters redistributed
routing information.
Enter a number that corresponds to the autonomous system number. The range is from 1
to 65355.
(OPTIONAL) Routes are independently redistributed into IS-IS Level 1 routes only.
(OPTIONAL) Routes are independently redistributed into IS-IS Level 1 and Level 2 routes.
(OPTIONAL) Routes are independently redistributed into IS-IS as Level 2 routes only. This
setting is the default.
(OPTIONAL) The value used for the redistributed route. Use a metric value that is
consistent with the destination protocol. The range is from 0 to 16777215. The default is
0.
(OPTIONAL) The external link type associated with the default route advertised into a
routing domain. The two options are:
external
internal
map-name is an identifier for a configured route map. The route map filters imported
routes from the source routing protocol to the current routing protocol.
If you do not specify a map-name, all routes are redistributed. If you specify a keyword,
but fail to list route map tags, no routes are imported.
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.

Advertisement

Table of Contents
loading

Table of Contents