Redistribute - Dell S6100 Configuration Manual

•
•
•
passive-interface default
•
•
•
•
no passive-interface interface
•
•
•
No passive-interface default
•
•
•
On configuring suppression using the passive-interface command, the state of the OSPF neighbor does not
change to INIT; instead, the state of the OSPF neighbor changes to DOWN after the dead-timer expires.

redistribute

Redistribute information from another routing protocol throughout the OSPF process.
Syntax redistribute {connected | isis | ospf | rip | static} [metric metric-value |
metric-type type-value] [route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute {connected | isis | rip | static} command.
Parameters
connected
isis
ospf
rip
static
metric metric-value
The previous no passive-interface interface is removed from the running configuration.
The ABR status for the router is updated.
Save passive-interface interface into the running configuration.
All present and future OSPF interfaces are marked as passive.
Any adjacency is explicitly terminated from all OSPF interfaces.
All previous passive-interface interface commands are removed from the running configuration.
All previous no passive-interface interface commands are removed from the running
configuration.
Remove the interface from the passive list.
The ABR status for the router is updated.
If passive-interface default is specified, then save no passive-interface interface into
the running configuration.
Clear everything and revert to the default behavior.
All previously marked passive interfaces are removed.
May update ABR status.
Enter the keyword connected to specify that information from active routes on
interfaces is redistributed.
Enter the keyword isis to specify that ISO IS-IS information is redistributed.
Enter the keyword ospf to specify that information corresponding to OSPF is
redistributes.
Enter the keyword rip to specify that RIP routing information is redistributed.
Enter the keyword static to specify that information from static routes is redistributed.
(OPTIONAL) Enter the keyword metric then a number. The range is from 0 (zero) to
16777214.
Open Shortest Path First (OSPFv2 and OSPFv3) 1105