Dell S6100 Configuration Manual page 1023

Parameters
vrf vrf-name
static
group-address
[source-address]
count
snooping [vlan vlan-
id] [group-address
[source-address]]
summary
vlt
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
9.2.(0.0)
(OPTIONAL) Enter the keyword vrf followed by the name of the VRF to configure this
setting on that VRF.
NOTE:
VRF.
(OPTIONAL) Enter the keyword static to view static multicast routes.
(OPTIONAL) Enter the multicast group-address to view only routes associated with that
group. Enter the source-address to view routes with that group-address and source-
address.
(OPTIONAL) Enter the keyword count to view the number of multicast routes and
packets.
Enter the keyword snooping to display information on the multicast routes PIM-SM
snooping discovers.
Enter a VLAN ID to limit the information displayed to the multicast routes PIM-SM
snooping discovers on a specified VLAN. The VLAN ID range is from 1 to 4094.
Enter a multicast group address and, optionally, a source multicast address in dotted
decimal format (A.B.C.D) to limit the information displayed to the multicast routes PIM-
SM snooping discovers for a specified multicast group and source.
(OPTIONAL) Enter the keyword summary to view a summary of all routes.
(OPTIONAL) Enter the keyword vlt to view multicast routes with a spanned incoming
interface. Enter a multicast group address in dotted decimal format (A.B.C.D) to limit the
information displayed to the multicast routes for a specified multicast group and optionally
a source multicast address in dotted decimal format (A.B.C.D) to limit the information
displayed for a specified multicast source. Enter the keyword count to display the total
number of multicast routes with the spanned IIF.
EXEC
EXEC Privilege
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Added support for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Added support for keyword vlt to the Z9000, S4810, and S4820T.
Applies to specific VRF if input is provided, else applies to Default
Multicast 1023