Show Hardware Mac - Dell S6100 Configuration Manual

Version
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.0
8.3.7.0
7.8.1.0
Usage Information This command enables a hardware watchdog mechanism that automatically reboots an Dell Networking OS
switch/ router with a single unresponsive unit. This behavior is a last-resort mechanism intended to prevent a
manual power cycle.

show hardware mac

Display MAC ACL entries for the specified stack-unit, port-pipe and pipeline ID.
Syntax show hardware mac {eg-acl | in-acl} stack-unit id port-set 0–0 pipeline
pipeline-number
Parameters
eg-acl | in-acl
stack-unit id
port-set 0–0
pipeline pipeline-
number
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.0.2.0
8.3.19.0
516 Debugging and Diagnostics
Description
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Enter either the keyword eg-acl or the keyword in-acl to select between ingress or
egress ACL data.
Enter the keyword stack-unit to select the stack unit ID.
Enter the keywords port-set with a port-pipe number to display the MAC ACL entries
for the specified port-pipe number. . The range is from 0 to 0.
Enter the keyword pipeline with a pipeline number to display the MAC ACL entries
specific to the pipeline number. The range is from 0 to 3.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.