Fip-Snooping Port-Mode Fcoe-Trusted - Dell S6100 Configuration Manual

fip-snooping port-mode fcoe-trusted

Configure the port for bridge-to-bridge links. It is not recommended to use this command because multi-hop FSB is not supported.
Syntax fip-snooping port-mode fcoe-trusted
To remove the bridge-to-bridge link configuration from the port, use the no fip-snooping port-mode
fcoe-trusted command.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0)
9.7(0.0)
8.3.19.0
8.3.12.0
8.3.16.0
Usage Information
show fip-snooping config
Display the FIP snooping status and configured FC-MAP values.
Syntax show fip-snooping config
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
602 FIP Snooping
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S3048-ON and S4048-ON.
This command is deprecated.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on MXL 10/40GbE Switch IO Module.
NOTE: This command is deprecated from the Dell Networking OS.
EXEC
EXEC Privilege