Portmode Hybrid - Dell S6100 Configuration Manual

Port 0
•
•
•
•
•
Port 1
•
•
•
•
•
Link Status Between Port 1 and Port 2
•
•
•
•
•
* You cannot disable auto-negotiation when the speed is set to 1000 or auto.

portmode hybrid

To accept both tagged and untagged frames, set a physical port or port-channel. A port configured this way is identified as a hybrid port in
report displays.
Syntax portmode hybrid
To return a port to accept either tagged or untagged frames (non-hybrid), use the no portmode hybrid
command.
Defaults non-hybrid
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
694 Interfaces
auto-negotiation enabled* speed 1000 or auto
auto-negotiation enabled speed 100
auto-negotiation disabled speed 100
auto-negotiation disabled speed 100
auto-negotiation enabled* speed 1000 or auto
auto-negotiation enabled* speed 1000 or auto
auto-negotiation enabled speed 100
auto-negotiation disabled speed 100
auto-negotiation enabled speed 100
auto-negotiation disabled speed 100
Up at 1000 Mb/s
Up at 100 Mb/s
Up at 100 Mb/s
Down
Down
Description
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.