Dell S6100 Configuration Manual page 1104

Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
7.4.1.0
pre- 6.1.1.1
Usage Information
Although the passive interface does not send or receive routing updates, the network on that interface is still
included in OSPF updates sent using other interfaces.
The default keyword sets all interfaces as passive. You can then configure individual interfaces, where
adjacencies are desired, using the no passive-interface interface command. The no form of this
command is inserted into the configuration for individual interfaces when the no passive-interface
interface command is issued while passive-interface default is configured.
This command behavior has changed as follows:
passive-interface interface
1104 Open Shortest Path First (OSPFv2 and OSPFv3)
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
• For a VLAN, enter the keyword vlan then a number from 1 to 4094.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Modified to include the keyword default.
Introduced on the E-Series.