Show Running-Config Dcb-Buffer-Threshold - Dell S6100 Configuration Manual

1
Dell#
Dell(conf)#dcb pfc-total-buffer-size 2000
% Error: Total buffer size should not be less than the buffer consumed already in the sy
Dell(conf)#

show running-config dcb-buffer-threshold

Displays the DCB buffer threshold details in the running configuration.
Syntax show running—config dcb-buffer-threshold
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.7(0.0)
9.3(0.0)
Usage Information
The following table describes the output fields displayed for the show running-config dcb-buffer-
threshold command:
Field
Field
Profile name
Priority
buffer-size
pause-threshold-
value
resume-threshold-
value
Example
Dell#show interfaces tengigabitethernet 1/1/1 pfc buffer-threshold
Interface TenGigabitEthernet 1/1/1
Interface
------------------------------------------------------------------------------------------------------------
Te 1/1/1
Te 1/1/1
Te 1/1/1
Te 1/1/1
Te 1/1/1
Te 1/1/1
Te 1/1/1
Te 1/1/1
On interfaces in which PFC is not enabled.
Dell#show interfaces te 1/1/2 pfc buffer-threshold
Interface TenGigabitEthernet 1/1/2
506 Data Center Bridging (DCB)
0.3 3399 2800
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S6000-ON and Z9500.
Introduced on the S6000 platform.
Description
Description
Name of the DCB buffer threshold profile
The priority of the queue for which the buffer space settings apply
Ingress buffer size
Buffer limit at which the port sends the pause to peer in KB.
Buffer offset limit at which the port resumes the peer in KB.
Queue# Lossless Buffer-size Pause-threshold
(KB)
Q0 NO - -
Q1 NO - -
Q2 NO - -
Q3 YES 9 9
Q4 NO - -
Q5 NO - -
Q6 NO - -
Q7 NO - -
1040
Peak-headroom Resume-offset
(KB) (KB) (KB)
- -
- -
- -
36 9
- -
- -
- -
- -
1040
Shared Threshold
Weight
-
-
-
11
-
-
-
-
720