Show Hardware Stack-Unit Buffer - Dell S6100 Configuration Manual

Example (Details)
**************************
bcmLinkMonStatusShow: The Current Link Status Is
Front End Link Status
Front End Port Presence
Backplane Link Status
******************************************************
Link Status of all the ports in the Device - 0
The linkStatus of Front End Port 1 is FALSE
The linkStatus of Front End Port 2 is FALSE
The linkStatus of Front End Port 3 is FALSE
The linkStatus of Front End Port 4 is FALSE
The linkStatus of Front End Port 5 is FALSE
The linkStatus of Front End Port 6 is FALSE
The linkStatus of Front End Port 7 is FALSE
The linkStatus of Front End Port 8 is FALSE
[output truncated]
Related Commands
•
•
•
•

show hardware stack-unit buffer

Display the counters for the specified port, minimum guaranteed buffer of a priority-group, and the shared buffer.
Syntax show hardware stack-unit stack-unit-number buffer {total-buffer | unit unit-
number {total-buffer | interface all {buffer-info | priority-group {id | all}
buffer-info | queue {id| all} buffer-info}}}
Parameters
stack-unit unit-
number
buffer unit <0–0>
interface interface
clear hardware system-flow
show interfaces stack-unit
show processes cpu (S-Series)
Series.
show system — display the current status of all the stack members or a specific member.
Enter the keywords stack-unit to select a particular stack member and then enter
one of the following command options to display a collection of data based on the option
entered.
Enter the keyword buffer. To display the total buffer statistics for the stack unit, enter
the keyword total-buffer. To display the buffer statistics for a specific unit, enter the
keyword unit and a unit number 0 .
Enter the keyword interface followed by the keyword all to display buffer statistics for
all interface.
Enter any of the following keywords and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000
0x00000000
— clear the statistics from selected hardware components.
— display information on all interfaces on a specific S-Series stack member.
— display the CPU usage information based on the processes running in an S-
Debugging and Diagnostics 523