Show Ip Route Summary - Dell S6100 Configuration Manual

Gateway of last resort is not set
R
R
R
R
C
Related Commands
•
•

show ip route summary

View a table summarizing the IP routes in the switch.
Syntax show ip route [vrf vrf-name] [summary]
Parameters
vrf vrf-name
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.4(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
806 IPv4 Routing
L2- IS-IS level-2, IA - IS-IS inter area, * - candidate default,
>- non-active route, + - summary route
Destination Gateway
----------- -------
2.1.0.0/24 via 2.1.4.1, Te 1/1/1/1 120/2
2.1.1.0/24 via 2.1.4.1, Te 1/1/1/1 120/2
2.1.2.0/24 via 2.1.4.1, Te 1/1/1/1 120/1
2.1.3.0/24 via 2.1.4.1, Te 1/1/1/1 120/1
2.1.4.0/24 Direct, Te 1/1/1/1
ip prefix-list — enter CONFIGURATION-IP PREFIX-LIST mode and configures a prefix list.
show ip prefix-list summary
Enter the keyword vrf followed by the name of the VRF to view information on the IP
routes corresponding to that VRF.
EXEC
EXEC Privilege
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Added support for VRF.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Dist/Metric Last Change
----------- -----------
— display a summary of the configured prefix lists.
3d0h
3d1h
3d0h
3d1h
0/0 3d1h