Show Cam Pbr - Dell S6100 Configuration Manual

source port
destination-port
source-port-range
destination-port-
range
Defaults none
Command Modes REDIRECT-LIST
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.4(0.0)

show cam pbr

Display the PBR CAM content.
Syntax show cam pbr {interface interface | stack—unit slot-number port-set number
[pipeline number]} [summary]
Parameters
interface interface
stack–unit number
port-set number
summary
pipeline number
• range = inclusive range of ports (you must specify two ports for the port command
parameter.)
Enter the keywords source-port then the port number to be matched in the ACL rule
in the ICAP rule
Enter the keywords destination-port then the port number to be matched in the
ACL rule in the ICAP rule.
Enter the keywords Source-port-range then the range of the start port to end port
to be matched in the ACL rule in the ICAP rule.
Enter the keywords destination-port-range then the range of the start port to
end port to be matched in the ACL rule in the ICAP rule.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Added support for the track-id on the S4810, S4820T, S6000, S6000-ON, and Z9000.
Introduced on the Z9500.
Introduced on the S4810, S4820T, S6000, and Z9000.
Enter the keyword interface then the name of the interface.
Enter the keyword stack-unit then the slot number.
Enter the keywords port-set then the port-pipe number.
Enter the keyword summary to view only the total number of CAM entries.
Enter the keyword pipeline and a number to which the interface belongs. The range is
from 0 to 3.
Policy-based Routing (PBR) 1195