Lsp-Gen-Interval - Dell S6100 Configuration Manual

Defaults Adjacency changes are not logged.
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
Usage Information This command allows you to monitor adjacency state changes, which are useful when you monitor large networks.
Messages are logged in the system's error message facility.

lsp-gen-interval

Set the minimum interval between successive generations of link-state packets (LSPs).
Syntax lsp-gen-interval [level-l | level-2] interval seconds [initial_wait_interval
seconds [second_wait_interval seconds]]
To restore default values, use the no lsp-gen-interval [level-l | level-2] interval seconds
[initial_wait_interval seconds [second_wait_interval seconds]] command.
Parameters
level-l
level-2
interval seconds
initial_wait_interval
seconds
second_wait_interv
al seconds
Defaults See Parameters.
Command Modes ROUTER ISIS
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
(OPTIONAL) Enter the keywords level-1 to apply the configuration to generation of
Level-1 LSPs.
(OPTIONAL) Enter the keywords level-2 to apply the configuration to generation of
Level-2 LSPs.
Enter the maximum number of seconds between LSP generations. The range is from 0 to
120 seconds. The default is 5 seconds.
(OPTIONAL) Enter the initial wait time, in seconds, before running the first LSP
generation. The range is from 0 to 120 seconds. The default is 1 second.
(OPTIONAL) Enter the wait interval, in seconds, between the first and second LSP
generation. The range is from 0 to 120 seconds. The default is 5 seconds.
Intermediate System to Intermediate System (IS-IS) 873