Arp Retries; Arp Timeout - Dell PowerConnect 8024 Cli Reference Manual

arp retries

Use the arp retries command in Global Configuration mode to configure the ARP count of
maximum requests for retries. To return to the default value, use the no form of this command.
Syntax
integer
arp retries
no arp retries
integer — The maximum number of requests for retries. (Range: 0-10)
•
Default Configuration
The default value is 4 retries.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines 6 as the maximum number of retries.
console(config)#arp retries 6

arp timeout

Use the arp timeout command in Global Configuration mode to configure the ARP entry
ageout time. Use the no form of the command to set the ageout time to the default.
Syntax
integer
arp timeout
no arp timeout
integer — The IP ARP entry ageout time. (Range: 15-21600 seconds)
•
Default Configuration
The default value is 1200 seconds.
Command Mode
Global Configuration mode
555
ARP Commands