Bgp Non-Deterministic-Med - Dell S6100 Configuration Manual

stale-path-time
seconds
role receiver-only
Defaults as above
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage Information
This feature is advertised to BGP neighbors through a capability advertisement. In Receiver Only mode, BGP saves
the advertised routes of peers that support this capability when they restart.
BGP graceful restart is active only when the neighbor becomes established. Otherwise it is disabled. Graceful-
restart applies to all neighbors with established adjacency.
This command automatically restarts the BGP instance for the configuration to take effect.

bgp non-deterministic-med

Compare MEDs of paths from different autonomous systems.
Syntax bgp non-deterministic-med
To return to the default, use the no bgp non-deterministic-med command.
Defaults Disabled (that is, paths/routes for the same destination but from different ASs do not have their MEDs compared).
Command Modes ROUTER BGP
Enter the keyword stale-path-time then the maximum number of seconds to wait
before restarting a peer's stale paths. The default is 360 seconds.
Enter the keyword role receiver-only to designate the local router to support
graceful restart as a receiver only.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Border Gateway Protocol 357