Clear Ip Ospf - Dell S6100 Configuration Manual

Parameters
ref-bw
Defaults 100 megabits per second.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
pre- 6.1.1.1

clear ip ospf

Clear all OSPF routing tables.
Syntax clear ip ospf process-id [vrf vrf-name] [process]
Parameters
process-id
vrf vrf-name
process
Command Modes EXEC Privilege
(OPTIONAL) Specify a reference bandwidth in megabits per second. The range is from 1
to 4294967. The default is 100 megabits per second.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the OSPF Process ID to clear a specific process. If no Process ID is entered, all
OSPF processes are cleared.
Enter the keyword vrf and then the name of the VRF to clear all OSPF routing tables
corresponding to that VRF.
(OPTIONAL) Enter the keyword process to reset the OSPF process.
Open Shortest Path First (OSPFv2 and OSPFv3) 1071