Show Running-Config Monitor Session - Dell S6100 Configuration Manual

Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.4.0.0
9.0.2.0
8.3.19.0
8.3.7.0
8.3.11.1
8.1.1.0
7.7.1.0
7.5.1.0
7.4.1.0
Example
Dell# show monitor session 1
SessID
IP
------
--------
0.0.0.0
Dell#
Dell# show monitor session
SessID
IP
------
--------
0.0.0.0
Dell#
Related Commands
•
•

show running-config monitor session

Display the running configuration of all monitor sessions or a specific session.
Syntax show running-config monitor session {session-ID}
To display the running configuration for all monitor sessions, use the show running-config monitor
session command.
1230 Port Monitoring
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Added support for the RPM / ERPM.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Source
DSCP TTL
------
----
1 Te 1/1/2/1
0
Source
DSCP TTL
------
----
1 Te 1/1/2/1
0
monitor session — creates a monitoring session.
rate-limit — configures the rate-limit.
Destination
Drop Rate Gre-Protocol FcMonitor
-----------
--- ---- ----
remote-ip
0 No N/A
Destination
Drop Rate Gre-Protocol FcMonitor
-----------
--- ---- ----
remote-ip
0 No N/A
Dir Mode Source IP
--- ---- ---------
----------- ---------
rx Port 0.0.0.0
N/A yes
Dir Mode Source IP
--- ---- ---------
----------- ---------
rx Port 0.0.0.0
N/A yes
Dest
Dest