Advertise Interface-Port-Desc - Dell S6100 Configuration Manual

Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
7.6.1.0
7.4.1.0

advertise interface-port-desc

Advertise port descriptor.
Syntax advertise interface-port-desc {description | port-id}
To remove the advertised port descriptor, use the no advertise interface—port—desc {description
| port-id} command.
Parameters
description
port-id
Defaults None
Command Modes
CONFIGURATION (conf-lldp)
INTERFACE (conf-if-interface-lldp)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(2.0P1)
Usage Information
If you do not specify the option, by default the port-id takes higher precedence and sends the port-id in the LLDP
packets.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keyword description then the interface description.
Enter the keyword port-id then the port-id. The range is from 0 to 7.
Description
Introduced the description and port-id options.
Link Layer Discovery Protocol (LLDP) 957