Private-Vlan Mode - Dell S6100 Configuration Manual

Related Commands
•
•
•
•

private-vlan mode

Set PVLAN mode of the selected VLAN to community, isolated, or primary.
Syntax [no] private-vlan mode {community | isolated | primary}
To remove the PVLAN configuration, use the no private-vlan mode {community | isolated |
primary} command syntax.
Parameters
community
isolated
primary
Defaults none
Command Modes INTERFACE VLAN
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
Usage Information The VLAN:
•
1236 Private VLAN (PVLAN)
private-vlan mode — sets the mode of the selected VLAN to community, isolated, or primary.
private-vlan mapping secondary-vlan
show arp — displays the ARP table.
switchport mode private-vlan
Enter the keyword community to set the VLAN as a community VLAN.
Enter the keyword isolated to configure the VLAN as an isolated VLAN.
Enter the keyword primary to configure the VLAN as a primary VLAN.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
can be in only one mode, either community, isolated, or primary.
— maps secondary VLANs to the selected primary VLAN.
— sets PVLAN mode of the selected port.