Debug Ip Bgp Dampening - Dell S6100 Configuration Manual

Hide thumbs Also See for S6100:
Table of Contents

Advertisement

debug ip bgp dampening

View information on routes being dampened.
Syntax
debug ip bgp [vrf vrf-name] [ipv4 {unicast | multicast} | ipv6 unicast]
dampening
To disable debugging, use the no debug ip bgp dampening command.
Parameters
vrf vrf-name
ipv4 multicast
ipv4 unicast
ipv6 unicast
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
368
Border Gateway Protocol
debug ip bgp keepalives
— view information about BGP keepalives.
debug ip bgp notifications
— view information about BGP notifications.
debug ip bgp updates
— view information about BGP updates.
show debugging
— view enabled debugging operations.
Enter the keyword vrf followed by the name of the VRF to view information on
dampened routes corresponding to that VRF.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword multicast to view
dampened-route information related only to ipv4 multicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword multicast to view
dampened-route information related only to ipv4 unicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword unicast to view
dampened-route information related only to ipv6 unicast routes.
Description
Introduced on the S6100.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.

Advertisement

Table of Contents
loading

Table of Contents