Show Ipv6 Ospf Interface - Dell S6100 Configuration Manual

LSA count
Rtr LSA Count
Net LSA Count
Inter Area Pfx LSA Count 1
Inter Area Rtr LSA Count
Group Mem LSA Count
Type-7 LSA count
Intra Area Pfx LSA Count
Intra Area TE LSA Count
Area 1 database summary
Type
Brd Rtr Count
AS Bdr Rtr Count
LSA count
Rtr LSA Count
Net LSA Count
Inter Area Pfx LSA Count
Inter Area Rtr LSA Count
Group Mem LSA Count
Type-7 LSA count
Intra Area Pfx LSA Count
Intra Area TE LSA Count
E1200-T2C2#sh ipv6 ospf neighbor
Neighbor ID
Interface
63.114.8.36

show ipv6 ospf interface

View OSPFv3 interface information.
Syntax show ipv6 ospf [process-number] [vrf vrf-name] [interface]
Parameters
process-number
vrf vrf-name
interface
1182 Open Shortest Path First (OSPFv2 and OSPFv3)
6
2
1
0
0
0
2
2
Count/Status
1
1
8
1
0
5
0
0
0
2
2
Pri State
1 FULL/DR
Enter the OSPF process number.
(OPTIONAL) Enter the keyword vrf followed by the name of the VRF to display neighbors
corresponding to that VRF.
NOTE: If you do not specify this option, neighbors corresponding to the
default VRF are displayed.
(OPTIONAL) Enter one of the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
Dead Time Interface ID
00:00:37 4 Te 1/1/4/1