Set Community - Dell S6100 Configuration Manual

Version
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.8.1.0
7.6.1.0
7.5.1.0
pre-6.1.1.0
Usage Information
The community list used in the set comm-list delete command must be configured so that each filter
contains only one community. For example, the filter deny 100:12 is acceptable, but the filter deny 120:13
140:33 results in an error.
If the set comm-list delete command and the set community command are configured in the same
route map sequence, the deletion command (set comm-list delete) is processed before the insertion
command (set community).
Related Commands
•
•

set community

Allows you to assign a BGP COMMUNITY attribute.
Syntax set community {community-number | local-as | no-advertise | no-export | none}
[additive]
To delete a BGP COMMUNITY attribute assignment, use the no set community {community-number |
local-as | no-advertise | no-export | none} command.
Parameters
community-number
local-AS
no-advertise
276 Access Control Lists (ACL)
Description
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
match community — redistribute routes that match the COMMUNITY attribute.
set community — specify a COMMUNITY attribute.
Enter the community number in AA:NN format where AA is the AS number (2 bytes) and
NN is a value specific to that autonomous system.
Enter the keywords local-AS to drop all routes with the COMMUNITY attribute of
NO_EXPORT_SUBCONFED.
All routes with the NO_EXPORT_SUBCONFED (0xFFFFFF03) community attribute must
not be advertised to external BGP peers.
Enter the keywords no-advertise to drop all routes containing the well-known
community attribute of NO_ADVERTISE.