Dell S6100 Configuration Manual page 541

Version
9.3(0.0)
Usage Information
The following information is displayed based on the buffer-info type, such as device-level details, queue-based
snapshots, or priority group-level snapshot in the egress and ingress direction of traffic:
•
•
When the buffer-stats-snapshot is disabled, the following informational message is displayed when you run the
show command: %Info: Buffer-stats-snapshot feature is disabled.
Example
Dell# show hardware buffer-stats-snapshot resource interface fortyGigE 0/0
priority-group 7
Unit 0 unit: 0 port: 1 (interface Fo 0/0)
--------------------------------------------------
PG# PRIORITIES
--------------------------------------------------
7
Dell# show hardware buffer-stats-snapshot resource interface fortyGigE 0/0
priority-group 7
Unit 0 unit: 0 port: 1 (interface Fo 0/0)
--------------------------------------------------
PG# PRIORITIES
--------------------------------------------------
0
1
2
3
4
5
6
7
Description
Introduced on the S6000, S4810, and S4820T.
Device-ingress – Displays total buffer accounting usage for the unit.
Device-egress –Display total buffer usage for the unit, total multicast buffer usage for the unit and also on per-
service-pool basis. Counters will be displayed for the 2 service-pools – one for normal traffic and other for DCB
traffic.
SHARED CELLS
0-2,5 0
SHARED CELLS
- 0
- 0
- 0
7 0
6 0
4 0
3 0
0-2,5 0
HEADROOM CELLS
0
HEADROOM CELLS
0
0
0
0
0
0
0
0
Debugging and Diagnostics 541