Hello-Time - Dell S6100 Configuration Manual

To return to the default setting, use the no forward-delay command.
Parameters
seconds
Defaults 15 seconds
Command Modes MULTIPLE SPANNING TREE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.5.1.0
Related Commands
•
•

hello-time

Set the time interval between generation of MSTB bridge protocol data units (BPDUs).
Syntax hello-time seconds
To return to the default value, use the no hello-time command.
Enter the number of seconds the interface waits in the Blocking State and the Learning
State before transiting to the Forwarding State. The range is from 4 to 30. The default is
15 seconds.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
max-age — change the wait time before MSTP refreshes protocol configuration information.
hello-time — change the time interval between bridge protocol data units (BPDUs).
Multiple Spanning Tree Protocol (MSTP) 1003