Show Hardware System-Flow - Dell S6100 Configuration Manual

show hardware system-flow

Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax show hardware system-flow stack-unit id port-set number [counters | pipeline
pipeline-number]
Parameters
stack-unit id
port-set number
[counters | pipeline
pipeline-number]
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
Example
Dell# show hardware system-flow stack-unit 1 port-set 0 counters
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Example
Dell# show hardware system-flow stack-unit 1 port-set 0
############## FP Entry for redirecting STP BPDU to CPU Port ################
EID 0x00000bfb: gid=0x3c,
DstMac
Enter the keywords stack-unit to select a stack member ID.
Enter the keywords port-set with a port-pipe number.
(OPTIONAL) Enter the keyword counters for the specified port-pipe.
Enter the keyword pipeline to display entries specific to a pipeline.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
EntryId Description
3067 STP BPDU Redirects
3065 LLDP BPDU Redirects
3063 LACP traffic Redirects
3062 GVRP traffic Redirects
3061 ARP Reply Redirects
3060 802.1x frames Redirects
3059 VRRP frames Redirects
3058 IPv6VRRP frames Redirects
3056 OSPFv3 Multicast [33:33:00:00:00:06]
3057 OSPFv3 Multicast [33:33:00:00:00:05]
3054 GRAT ARP
3053 ISIS L1, L2 traffic Redirects
3052 ISIS P2P IIH, EH
traffic Redirects
slice=5, slice_idx=0, part =1 prio=0xbfb, flags=0x10202, Installed, Enabled
tcam: color_indep=0,
Part:0 Offset0: 48 Width0: 16
Part:0 Offset1: 64 Width1: 16
Part:0 Offset2: 80 Width2: 4
#HITS for Pipeline: 0
0
0
0
0
0
0
0
0
0
0
0
0
0
Debugging and Diagnostics 537