Dell S6100 Configuration Manual page 528

queue
priority-group
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.8(0.0)
Usage Information <Interface><slot/port>-Queue ucast/mcast — Displays the total unicast/multicast buffer usage on
per-port per-queue basis.
Example displaying
Dell# show hardware buffer-stats-snapshot resource interface hundredGigE 1/10
egress queue-level queue all
Stack-unit 1 unit: 0 port: 34 (interface Hu 1/10)
snapshot for both
---------------------------------------
unicast and
Q# TYPE
multicast packets for
---------------------------------------
UCAST
the specific interface
UCAST
UCAST
UCAST
UCAST
UCAST
UCAST
UCAST
UCAST
UCAST
MCAST
MCAST
MCAST
MCAST
MCAST
MCAST
MCAST
MCAST
528 Debugging and Diagnostics
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
Enter the keyword queue followed by all for displaying details of all queues, ucast
queue-id or all for displaying Unicast queue details, and mcast queue-id or all for
displaying Multicast queue details.
Enter the keyword priority-group followed by id for specific priority-group or
keyword all.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500.
Q# TOTAL BUFFERED CELLS
0 0
1 0
2 0
3 0
4 0
5 0
6 0
7 0
8 0
9 0
0 0
1 0
2 0
3 0
4 0
5 0
6 0
7 0