Iscsi Enable - Dell S6100 Configuration Manual

dscp dscp-value
remark
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
8.3.19.0
8.3.12.0
8.3.16.0
Usage Information By default, iSCSI flows are assigned to dot1p priority 4.

iscsi enable

Globally enable iSCSI optimization.
Syntax iscsi enable
To disable iSCSI optimization, use the no iscsi enable command.
Parameters
enable
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
8.3.19.0
8.3.12.0
8.3.16.0
Enter the DSCP value assigned to the incoming packets in an iSCSI session. The valid
range is from 0 to 63. The default is: the DSCP value in ingress packets is not changed.
Marks the incoming iSCSI packets with the configured dot1p or DSCP value when they
egress to the switch. The default is: the dot1and DSCP values in egress packets are not
changed.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on MXL 10/40GbE Switch IO Module.
Enter the keyword enable to enable the iSCSI optimization feature.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on MXL 10/40GbE Switch IO Module.
iSCSI Optimization 905