Port-Channel-Protocol Lacp - Dell S6100 Configuration Manual

Version
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1

port-channel-protocol lacp

Enable LACP on any LAN port.
Syntax port-channel-protocol lacp
To disable LACP on a LAN port, use the no port-channel-protocol lacp command.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
6.2.1.1
Related Commands
•
•
916 Link Aggregation Control Protocol (LACP)
Description
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
show lacp — display the LACP information.
show interfaces port-channel — display information on configured Port Channel groups.