Initiator
IP Address TCP Port
10.10.0.44 33345
Session 1 :
----------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-35
Up Time:00:00:01:22(DD:HH:MM:SS)
Time for aging out:00:00:09:31(DD:HH:MM:SS)
ISID:806978696102
Initiator
IP Address TCP Port
10.10.0.53 33432
Related Commands
•
•
•
show run iscsi
Display all globally configured non-default iSCSI settings in the current Dell Networking OS session.
Syntax
show run iscsi
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
8.3.19.0
8.3.12.0
8.3.16.0
Related Commands
•
•
•
910
iSCSI Optimization
Initiator Target
IP Address
10.10.0.101 3260
Initiator Target
IP Address TCPPort ID
10.10.0.101 3260
show iscsi
— display the currently configured iSCSI settings.
show iscsi session
— display information about active iSCSI sessions on the switch.
show run iscsi
— show run iscsi.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on MXL 10/40GbE Switch IO Module.
show iscsi
— display the currently configured iSCSI settings.
show iscsi session
— display detailed information about active iSCSI sessions on the switch.
show iscsi session detailed
Target
TCPPort ID
Target
Connection
0
— display detailed information on active iSCSI sessions on the switch.
Connection
0