Clear Ip Fib Stack-Unit - Dell S6100 Configuration Manual

Version
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0

clear ip fib stack-unit

Clear all FIB entries in the specified stack unit (use this command with caution, refer to Usage Information.)
Syntax clear ip fib stack-unit unit-number vrf vrf-name
Parameters
unit-number
vrf vrf-name
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.4(0.0)
9.0.2.0
9.0.0.0
8.3.7.0
8.3.19.0
Usage Information To clear Layer 3 CAM inconsistencies, use this command.
750 IPv4 Routing
Description
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Enter the number of the stack unit.
Enter the keyword vrf followed by the name of the VRF to clear all FIB entries
corresponding to that VRF.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Added support for VRF.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S4820T.
CAUTION: Executing this command causes traffic disruption.