Ipv6 Dhcp Snooping Binding - Dell S6100 Configuration Manual

lease time
Defaults None
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
8.3.1.0
7.8.1.0
Related Commands
•

IPv6 DHCP Snooping Binding

Create a static DHCP snooping binding entry in the snooping database.
Syntax [no] ipv6 dhcp snooping binding mac address vlan-id vlan-id ipv6 ipv6-address
interface interface-type | interface-number lease value
564 Dynamic Host Configuration Protocol (DHCP)
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
Enter the keyword lease then the amount of time the IP address are leased. The range
is from 1 to 4294967295.
EXEC
EXEC Privilege
Description
Introduced on the S6100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on the E-Series.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the C-Series and S-Series.
show ip dhcp snooping — display the contents of the DHCP binding table.