Show Interfaces Port-Channel - Dell S6100 Configuration Manual

Version
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
Usage Information
This feature groups two LAGs to work in tandem as a supergroup. For example, if one LAG goes down, the other
LAG is taken down automatically, providing an alternate path to reroute traffic, avoiding oversubscription on the
other LAG. You can use both static and dynamic (LACP) LAGs to configure failover groups. For more information,
see the "Port Channel" section in the Dell Networking OS Configuration Guide.
Related Command
•
•

show interfaces port-channel

Display information on configured Port Channel groups.
Syntax show interfaces port-channel [channel-number] [brief] [description]
Parameters
channel-number
brief
description
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
734 Interfaces
Description
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the S-Series.
group — group two LAGs in a supergroup ("fate-sharing group").
show interfaces port-channel
For a Port Channel interface, enter the keyword port-channel then a number. The
range is from 1 to 4096.
NOTE:
range of ports.
•
(OPTIONAL) Enter the keyword brief to display only the port channel number, the
state of the port channel, and the number of interfaces in the port channel.
(OPTIONAL) Displays the port-channel information with description.
EXEC
EXEC Privilege
— display information on configured Port Channel groups.
This command also enables you to view information corresponding to a
For port-channel interfaces, you can specify multiple ports as port-range.
For example, if you want to display information corresponding to all ports
between 1 and 4, specify the port range as show interfaces port-
channel 1 - 4.