Show Fip-Snooping Enode - Dell S6100 Configuration Manual

Version
9.10(0.0)
9.8(1.0)
9.8(0.0)
9.7(0.0)
8.3.19.0
8.3.12.0
Example
Dell# show fip-snooping config
FIP Snooping Feature enabled Status: Enabled
FIP Snooping Global enabled Status: Enabled
Global FC-MAP Value: 0X0EFC00
FIP Snooping enabled VLANs
VLAN
----
100

show fip-snooping enode

Display information on the ENodes in FIP-snooped sessions, including the ENode interface and MAC address, FCF MAC address, VLAN ID
and FC-ID.
Syntax show fip-snooping enode [enode-mac-address]
Parameters
enode-mac-
address
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0)
9.7(0.0)
8.3.19.0
8.3.12.0
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S3048-ON and S4048-ON.
Introduced on the Z9500 and S6000-ON.
Introduced on the S4820T.
Introduced on the S4810.
Enabled FC-MAP
------- --------
TRUE 0X0EFC00
Enter the MAC address of the ENodes to display.
EXEC
EXEC Privilege
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S3048-ON and S4048-ON.
Introduced on the Z9500 and S6000-ON.
Introduced on the S4820T.
Introduced on the S4810.
FIP Snooping 603