Dell S6100 Configuration Manual page 664

vrrp [ipv6 {vr-id} |
vr-id]
learning-limit
vlan vlan-id
Defaults Without an interface specified, the command clears all interface counters.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.1)
9.10(0.0)
9.10(0.0)
9.9(0.0)
9.8(2.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.5.1.0
8.4.1.0
664 Interfaces
• For a tunnel interface, enter the keyword tunnel. The range is from 1 to 16383.
NOTE: This command also enables you to clear the port configurations
corresponding to a range of ports. However, for Open Networking (ON)
platforms the notation for specifying port range in the command is different
from how you specify in non-ON platforms.
• For non-ON platforms, you can specify multiple ports as slot/port-range. For
example, if you want to clear the port configurations corresponding to all ports
between 1 and 4, specify the port range as show interfaces interface-
type 1/1 - 4.
• For ON platforms, you can specify multiple ports as slot/port/[subport] -
slot/port/[subport]. For example, if you want to clear the port configurations
corresponding to all ports between 1 and 4, specify the port range as show
interfaces interface-type 1/1/1 - 1/1/4.
(OPTIONAL) Enter the keyword vrrp to clear the counters of all VRRP groups. To clear
the counters of VRRP groups on all IPv6 interfaces, enter ipv6. To clear the counters of
a specified group, enter a VRID number from 1 to 255.
(OPTIONAL) Enter the keywords learning-limit to clear unknown source address
(SA) drop counters when MAC learning limit is configured on the interface.
Enter the keyword vlan followed by the interface VLAN number. The range is from 1 to
4094.
Description
Introduced on the S6010-ON and S4048T-ON.
Introduced on the S3148.
Introduced on the S6100–ON.
Added support to clear the interface configurations corresponding to a range of ports.
Introduced on the S3100 series.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on the E-Series.
Added support (E-Series only) for VRRP groups in a VRF instance.