Ip Ospf Authentication-Key - Dell S6100 Configuration Manual

ip ospf authentication-key

Enable authentication and set an authentication key on OSPF traffic on an interface.
Syntax ip ospf authentication-key [encryption-type] key
To delete an authentication key, use the no ip ospf authentication-key command.
Parameters
encryption-type
key
Defaults Not configured.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
pre- 6.1.1.1
Usage Information All neighboring routers in the same network must use the same password to exchange OSPF information.
1090 Open Shortest Path First (OSPFv2 and OSPFv3)
(OPTIONAL) Enter 7 to encrypt the key.
Enter an eight-character string. Strings longer than eight characters are truncated.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.