Garp Vlan Registration (Gvrp) - Dell S6100 Configuration Manual

The Dell Networking operating system supports the basic GVRP commands on the Dell Networking OS.
The generic attribute registration protocol (GARP) mechanism allows the configuration of a GARP participant to propagate through a
network quickly. A GARP participant registers or de-registers its attributes with other participants by making or withdrawing declarations of
attributes. At the same time, based on received declarations or withdrawals, GARP handles attributes of other participants.
GVRP enables a device to propagate local VLAN registration information to other participant devices and dynamically update the VLAN
registration information from other devices. The registration information updates local databases regarding active VLAN members and
through which port the VLANs can be reached.
GVRP ensures that all participants on a bridged LAN maintain the same VLAN registration information. The VLAN registration information
propagated by GVRP includes both manually configured local static entries and dynamic entries from other devices.
GVRP participants have the following components:
• The GVRP application
• GARP information propagation (GIP)
• GARP information declaration (GID)
Important Points to Remember
• GVRP is supported on Layer 2 ports only.
• All VLAN ports added by GVRP are tagged.
• GVRP is supported on untagged ports belonging to a default VLAN and tagged ports.
• GVRP cannot be enabled on untagged ports belonging to a non-default VLAN unless native VLAN is turned on.
• GVRP requires end stations with dynamic access NICs.
• Based on updates from GVRP-enabled devices, GVRP allows the system to dynamically create a port-based VLAN (unspecified) with a
specific VLAN ID and a specific port.
• On a port-by-port basis, GVRP allows the system to learn about GVRP updates to an existing port-based VLAN with that VLAN ID and
IEEE 802.1Q tagging.
• GVRP allows the system to send dynamic GVRP updates about your existing port-based VLAN.
• GVRP updates are not sent to any blocked spanning tree protocol (STP) ports. GVRP operates only on ports that are in the forwarding
state.
• GVRP operates only on ports that are in the STP forwarding state. If you enable GVRP, a port that changes to the STP Forwarding
state automatically begin to participate in GVRP. A port that changes to an STP state other than forwarding no longer participates in
GVRP.
• VLANs created dynamically with GVRP exist only as long as a GVRP-enabled device is sending updates. If the devices no longer send
updates, or GVRP is disabled, or the system is rebooted, all dynamic VLANs are removed.
• GVRP manages the active topology, not non-topological data such as VLAN protocols. If a local bridge must classify and analyze
packets by VLAN protocols, manually configure protocol-based VLANs, and simply rely on GVRP for VLAN updates. But if the local
bridge must know only how to reach a given VLAN, then GVRP provides all necessary information.
• The VLAN topologies that GVRP learns are treated differently from VLANs that are statically configured. The GVRP dynamic updates
are not saved in NVRAM, while static updates are saved in NVRAM. When GVRP is disabled, the system deletes all VLAN interfaces
that were learned through GVRP and leaves unchanged all VLANs that were manually configured.
622

GARP VLAN Registration (GVRP)

GARP VLAN Registration (GVRP)
18