Clear Dampening - Dell S6100 Configuration Manual

Version
8.3.7.0
8.2.1.0
8.1.1.0
7.6.1.0
7.5.1.0
6.5.1.0
Example
Dell# clear counters
Clear counters on all interfaces [confirm]
Dell#
Related Commands
•

clear dampening

Clear the dampening counters on all the interfaces or just the specified interface.
Syntax clear dampening [interface]
Parameters
interface
Defaults Without an interface specified, the command clears all interface dampening counters.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
Description
Introduced on the S4810.
Added support for 4093 VLANs on the E-Series. Prior to the release, 2094 was
supported.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Updated the definition of the learning-limit option for clarity.
mac learning-limit — allow aging of MACs even though a learning-limit is configured or disallow station move
on learned MACs.
(OPTIONAL) Enter any of the following keywords and the interface information to clear
counters from a specified interface:
• For a Port Channel interface, enter the keywords port-channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Interfaces 665