Ip Msdp Shutdown - Dell S6100 Configuration Manual

ip msdp shutdown

Administratively shut down a configured MSDP peer.
Syntax ip msdp shutdown {peer address}
Parameters
peer address
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
6.2.1.1
ip multicast-msdp
Enable MSDP.
Syntax ip multicast-msdp
To exit MSDP, use the no ip multicast-msdp command.
Defaults Not configured.
Command Modes CONFIGURATION
996 Multicast Source Discovery Protocol (MSDP)
Enter the peer address in a dotted decimal format (A.B.C.D.).
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced