Arp Retries; Arp Timeout - Dell S4810 Reference Manual

arp retries

Set the number of ARP retries in case the system does not receive an ARP reply in response to an ARP
request.
S4810
Syntax
arp retries number
Parameters
number
Defaults 5
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0
Usage Retries are 20 seconds apart.
Information
Related show arp retries
Commands

arp timeout

Set the time interval for an ARP entry to remain in the ARP cache.
S4810
Syntax
arp timeout minutes
Parameters
minutes
IPv4 Routing
Enter the number of retries. The range is from 1 to 20. The
default is 5.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced.
— displays the configured number of ARP retries.
Enter the number of minutes. The range is from 0 to 35790.
The default is 240 minutes.
843