034-799 Auto Dial Without Dial Data Rap - Xerox workcentre 5335 series Service Manual

034-799 Auto Dial Without Dial Data RAP

BSD-ON: BSD 34.1 - FAX
Auto Dial is activated but no dial data is found.
Initial Actions
Power OFF/ON
Procedure
• Check the remote machine settings and line status, then perform the operation again.
• Ask customer to cancel the job and resend.
• Check the Fax line connection (telephone line).
• Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
• Disconnect then reconnect the PWBs in the FAX Module
• Check the sw version of the fax & controller sw - update if required
• Perform FAX Diagnostic GP 13
• Replace the FAX PWB (PL 18.5).
Initial Issue
WorkCentre 5335 Family Service Documentation
07/2011
2-647
BUS Updated 12/2011
Status Indicator RAPs
034-799