016-740 PS Booklet Output Tray Incorrect RAP
PS Booklet Output Tray is incorrect.
Procedure
•
Specify the tray that allows booklet printing.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - update if required
Initial Issue
WorkCentre 5335 Family Service Documentation
016-741 Cannot Shift to Download Mode Failure RAP
Not able to change into Download Mode.
•
Unable to transit to Download Mode because download prohibition was detected due to
SysData:700-420 = 1, or because a job exists.
•
The machine did not transit to Download Mode because it detected "User Operation in
Progress". (The machine remains in the "User Operation in Progress" state for 1 minute
after panel operation was completed)
Procedure
•
After completing a panel operation, wait for 1 minute or longer before starting the down-
load operation.
•
Cancel the Download Prohibited mode (set SysData:700-420 to 0) before retrying the
operation.
07/2011
2-249
BUS Updated 12/2011
Status Indicator RAPs
016-740, 016-741