Rep 12.1 Paddle Belt - Xerox workcentre 5335 series Service Manual

Figure 3 Loosen the Thumb Screws
4. Remove the Integrated Office Finisher.
Replacement
1. Reverse the removal procedure for replacement.
Repairs & Adjustments
REP 12.1, REP 12.2
Thumb Screws (2)
BUS Updated 12/2011
REP 12.2 Paddle Belt
Parts List on PL 22.3
Removal
1. Switch off the power and disconnect the power cord
2. Remove the Integrated Office Finisher from the machine
3. Remove the Compiler Assembly
4. Remove the front Pulley (Figure
(1)Remove E-Clip.
(2)Remove Flange.
(3)Remove Belt from Pulley.
(4)Remove Pulley.
Figure 1 Removing the Pulley
5. Remove the Front Bearing (Figure
(1)Remove Bearing.
07/2011
4-96
(REP 12.1).
(REP 12.20)
1):
2):
WorkCentre 5335 Family Service Documentation
Initial Issue