Xerox workcentre 5335 series Service Manual page 1143

4. Remove the Left Hand Cover (7 Screws)
NOTE: The Left Hand Cover Screws have a different thread than the other screws, keep
them with the cover for re-installation.
Figure 3 Removing Screws
5. Remove the Harness Guide (Figure 4).
a. Loosen the top screw, remove the bottom screw.
5
Figure 4 Removing Screws
Initial Issue
WorkCentre 5335 Family Service Documentation
(Figure 3).
4
BUS Updated 12/2011
6. Remove the Duplex Assembly from the Left Hand Cover (4 Screws)
Figure 5 Removing Screws
7. Remove the Duplex Sensor (Figure
NOTE: Be careful not to damage or lose the Sensor Actuator Spring.
Figure 6 Duplex Sensor
Replacement
1. To install, carry out the removal steps in reverse order.
07/2011
4-83
(Figure 5).
6
6).
Repairs & Adjustments
REP 10.2