016-218 PostScript (PS) Kit not Installed RAP
BSD-ON:
BSD 16.1 - ESS
Because PostScript (PS) Kit is not installed, XDOD functions cannot be fulfilled.
NOTE: the Postscript kit is a standard feature in XC machines, but it is optional elsewhere
Procedure
•
Switch the power OFF then ON.
•
XC: Reload the machine software
(GP
PWB
(PL
35.2)
XE: Check whether or not the Postscript kit is installed by pressing the Machine Status button,
then selecting the Software Versions button. If the Postscript kit is installed, Item 2 will read
"Controller + PS ROM". If Item 2 reads "Controller ROM", then the Postscript kit is not
installed. The Postscript feature is installed
Y
N
the customer must order the Postscript kit from the Sales rep
•
If the problem continues, replace the Postscript ROM
replace the ESS PWB
(PL
35.2). Reload the machine software
.
Initial Issue
WorkCentre 5335 Family Service Documentation
16). If the problem continues, replace the ESS
(PL
35.2). If the problem continues,
(GP
16).
BUS Updated 12/2011
016-219 Software Option RAP
BSD-ON:
BSD 16.1 - ESS
Functions such as local printing cannot be executed due to the Printing Kit SW Option not
being enabled. The ROM was replaced without license (Printer Kit SW Key not set).
Initial Actions
If this fault occurs during installation or network setup, the machine SW may not have been
loaded correctly; go to
GP 3
.
Procedure
Install the Printer Kit SW Option Key
07/2011
2-145
Software Options
and set to enable.
Status Indicator RAPs
016-218, 016-219