116-342 Sesami Manager Fail Rap; 116-343 Main Pwb Ic Rap - Xerox workcentre 5335 series Service Manual

116-342 SESAMi Manager Fail RAP

An internal shutdown occurred due to an error in processing SNMP (Simple Network Manage-
ment Protocol).
Initial Actions
Power Off/On
Procedure
Reload Software (GP 16).
Status Indicator RAPs
116-342, 116-343

116-343 Main PWB IC RAP

An error is detected in the IC in the ESS PWB.
Initial Actions
Power Off/On
Procedure
• Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
• Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
• Check the sw version of the controller sw - update if required
• Replace RAM DIMM on ESS PWB
• Replace ESS PWB
07/2011
2-862
BUS Updated 12/2011
(PL 35.2)
(PL 35.2) (If not fixed by this, reinstall the original ESS PWB)
WorkCentre 5335 Family Service Documentation
Initial Issue