Xerox workcentre 5335 series Service Manual page 1107

Figure 2 Full Rate Carriage Removal
5. Turn the Full Rate Carriage upside down.
6. Remove the Lamp Wire Harness from the Full Rate Carriage
(1) Remove the Screw & Plate.
(2) Remove the Lamp Wire Harness.
Figure 3 Full Rate Carriage Upside Down
7. Remove the Lamp Wire Harness from the Harness Guide of the Half Rate Carriage
ure 4)
(1) Remove the Lamp Wire Harness from the guide.
Repairs & Adjustments
REP 6.7
8. Remove the Lamp Wire Harness from the guide
(Figure 3)
9. Disconnect the Lamp Wire Harness from the IIT PWB
(Fig-
07/2011
4-46
BUS Updated 12/2011
Figure 4 Lamp Wire Harness Removal
(1) Remove the Lamp Wire Harness from the guide.
Figure 5 Lamp Wire Harness Guide
(1) Move the Block of the Connector Housing in the direction of the arrow.
(2) Disconnect the Lamp Wire Harness.
WorkCentre 5335 Family Service Documentation
(Figure 5)
(Figure 6)
Initial Issue